中国3000万经理人首选培训网站Inspection standard for insulation material绝缘材料检验标准1.0 OBJECTIVE 目的To define a procedure that provides for acceptance of parts quality by the end user through inspection for a specification time at a specified distance.建立此程序以确保通过最终客户定时定点的检测后所提供的零部件质量接收要求.2.0 SCOPE 范围 The inspection standard is use only for Megapower Shanghai.The insulation material include insulation foil,insulator,insulated washer.本检验标准适用于.绝缘材料包括绝缘薄膜，绝缘体，绝缘器，绝缘垫片等.3.0 DEFINE 定义 Major defects Point serious impact to the vision and use; And cant reach to the design requirement.主要缺点 指严重的影响使用及严重影响视觉;及无法达到原设计要求的缺点; Min defects Point impact to vision; And no important dimension according to the assy drawing.次要缺点 指轻微影响视觉及非关键尺寸的缺点; 4.0 SAMPLING PLAN AND ACCEPTABLE QUALITY LEVEL 抽样计划和允收水平4.1 Sampling plan 抽样计划 According to sampling plan of Megapower shanghai,the sampling grade is divided into Reduce sampling,normal sampling,increase sampling.抽样方案按照兆启上海的抽样计划，抽样等级分为正常抽样，减少抽样，加强抽样。正常选择抽样比例依照一般检验水准II级。
4.2 Acceptable Quality Level 允收水准 Major defect for AQL0.25;Min defect for AQL1.0,The sample plan is class two according to general inspection levels.主要缺陷为AQL0.25; 次要缺陷为AQL1.0; *REFERENCE INFO MIL-STD-105E *参考资料 MIL-STD-105E5.0 INSPECTION EQUIPMENTS 检验设备5.1 Appearance inspection view 外观检验目视5.2 Dimension inspection caliper 尺寸检验卡尺5.3 Function inspection high voltage meter,insulated meter 性能检验高压仪，绝缘仪6.0 INSPECTION CONDITION 检验条件 6.1 Distance the distance is 30cm between eyes with material.距离肉眼与被测物距离30cm左右。
6.2 TimeThe inspections time within seven seconds.时间在七秒钟内能确认缺陷。6.3 Lighting 500Lux照明应使用均匀、无方向性、至少500勒克司的照明。6.4 Temperature 20-28温度2028。
6.5 Inspection vision Inspection must be made by individual with 1.0 vision or vision corrected to 1.0 检查视力检验员裸视力和矫正视力为1.0。7.0 Appearance inspection外观检验S/N序号Inspection items检验项目Inspection standard检验标准Defect grade缺陷等级Remark备注MAMI1Cracking 破裂None无 X2Burr 毛边None无X3Dirty 脏污None 无X4Material 材质Must accord with drawing; 必须符合图纸要求X7.1 Dimension inspection 尺寸检验S/N序号Inspection items检验项目Inspection standard检验标准Defect grade缺陷等级Remark备注MAMI1Thickness 厚度According to drawing依图纸XWidth 宽度According to drawing依图纸XOther dimensions 其它尺寸According to drawing依图纸XMeasure Frequency 测试数量 5 pcs / lot /每批5个7.2 Function inspection 性能检验A.Insulation test 绝缘阻抗测试,According to the drawing 依照图纸要求,2pcs / lot 每批测2个;B.Hi-Pot test 高压测试,According to the dr个awing 依照图纸要求,2pcs / lot 每批测2个.更多免费资料下载请进好好学习社区